b'BAUM SWAY BAR LINK REPAIR KIT (REPAIR SOLUTION)The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece. For Mercedes 123, and 126 chassis cars.Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end o\x1f to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.BAUM PORSCHE FEELER GAUGESaves approximately 20 hours labor time versus replacing the entire sway FOR VALVE ADJUSTMENT (.004)bar.For adjusting valve clearance on Porsche 911QP1000 $128.681965-1994.000-721-213-20 $14.32BAUM BRAKE PAD GAUGETool to measure brake lining thickness without removal of the wheel.341260 $38.31BAUM TIMING CHAIN GUIDE RAIL PIN SLIDE HAMMER TOOL SETUsed to remove the timing chain guide rail pins on Mercedes 102, 103, 104, 110, 111, 116, 117, 119, 120, 272, 275, 601, 602, 603, 606, 615, 616, 617, and 642 engines.B116-2033 $126.71BAUM CRANKSHAFT SEAL TOOL SETFor removal and installation of the front and rear crankshaft seal on the BMW N40, N42, N45, N45T, N46, N46T, N52, N52K, N53, N54 and N55 engines.B119220PLUSXV2 $595.5711 12'