b'BAUMBAUMBAUMBAUM CYLINDER HEAD BOLT SOCKET -FUEL INJECTOR TOOLCRANKSHAFT SEAL TOOL SET VANOS UNIT SOLENOID SOCKET - 32 MM, E12 EXTERNAL TORX - 1/2" DRIVE Used to remove and install the fuel injectorsFor removal and installation of the rear crankshaft sealDEEP THIN WALL, 6-POINT - 1/2" DRIVEFor BMW M42, M44, M50, M52, M52TU, M54, M56,on BMW N55 engines. Only for fuel injectorson BMW N51, N52, N54 and N55 L6 engines. Used to remove and install the Vanos solenoid on BMW M52TU, M54, M60, M62, M62TU, S50, S52 and S62 engines. with bottom hold-down bracket. B119180PLUS $263.33 M56 and M62 engines.112250 $37.48 130270 $148.23 116420 $72.09BAUMBAUMBAUMBAUM CRANKSHAFT BOLT SOCKET - 24 MM,ENGINE BLOCK DRILL JIG DRAIN PLUG WRENCH - 14 MM ALLEN,CAMSHAFT ALIGNMENT TOOL KIT6-POINT - 3/4" DRIVE (DRILLING FIXTURE) 13 MM BOX Used to set up and hold the camshafts during 303-1438 $59.79 Used to drill out stripped cylinder head bolt holes in theUsed for oil service, including engine oil, di\x1ferential, andtiming chain replacement onengine block on BMW M52TU, M54 and M56 L6 engines. transmission drain plugs on Mercedes 107, 123, 124, 126,Mercedes 271.948 engines. B115000$325.44 129, 140, 170, 201, 202, 208, 210, and 220 chassis cars. B271-0140 $403.55B117-0207 $45.99BAUMLUG BOLT HOLE ALIGNMENT TOOLFor use on cars with 14 X 1.25 mm lug bolts. Includes 1 alignment tool.Use in place of lug bolts to hold wheel in position while installing the other lug bolts.M0030A-2 $13.20BAUMCAM HOLDING TOOL BAUMCONTROL ARM BUSHING TOOL BAUM FUEL INJECTOR AND SEAL TOOL KITUsed to hold the left intake camshaft in place duringRemoves and installs front lower control arm bushings onHigh pressure fuel injector remover and combustion chamber timing chain removal and installation on Mercedes 272 andMINI chassis R50, R52, R53, R55, R56, R57, R58 and R59. seal installation kit for VW/Audi 2.0L, 3.2L, 3.6L, 4.2L, 5.2L & TDI 273 engines. B315150 $246.50 (PD).B272/273CAM $54.44 BT10133PLUS $254.3116'